Landmaster (Garden master) 34 Rotovator Restoration

Home Forums The Main Forum Area Projects Landmaster (Garden master) 34 Rotovator Restoration

Viewing 15 posts - 1 through 15 (of 39 total)
  • Author
    Posts
  • #14502
    vhgmcbuddy
    Member

    Landmaster 34 2 stroke rotovator

    #14503
    vhgmcbuddy
    Member

    This is my new rotovator i have inherited from a family member.
    Machine runs really well. General plans are to fully restore it back to its former glory and hopefully exhibit it at a few show.

    #14504
    vhgmcbuddy
    Member

    Pictures

    Attachments:
    #14508
    vhgmcbuddy
    Member

    wheels taken off and power washed ready for sandblasting and a fresh lick of red paint.
    Can any body recommend what shade of red to use ?

    thanks
    tom

    Attachments:
    #14537
    charlie
    Keymaster

    Cant offer any advice as to what shade of red, but I do know red can be one of the worst colours for fading.

    #14539
    vhgmcbuddy
    Member

    I no I’ve had colourcharts against the red that’s left and none seem to match. It’s kinda gone a faded pink colour, I did think that massey furgie red would be near enough. It’s a hard decision

    Tom

    #14578
    charlie
    Keymaster

    you could try a bit of Brasso or T cut to see if red will come back.

    #14584
    vhgmcbuddy
    Member

    HI charlie ive sored it but thanks for the idea.
    right small update i managed to find a red which is very near and will look better than they currently do. also got my metropolis blue for the frame. the wheels are now sand blasted and primed ready for the 1st coat.
    ill update pictures of progress later on.
    tom

    Attachments:
    #14586
    vhgmcbuddy
    Member

    both wheels blasted and given 3 coats of primer and looking alot better allready.
    next is a blast of red paint.
    tom

    Attachments:
    #14594
    vhgmcbuddy
    Member

    Both wheels now painted red, there going to need another coat once dried but looking good already.
    once this is done its time to start on the rest of it.

    Attachments:
    #14628
    vhgmcbuddy
    Member

    ***Update*** cleaned gearbox up and metal tignes ready to paint tignes black. I’m gonna leave the gearbox (head) it’s self original.
    Then I’ll start on the rotovator and the engine it’s self

    Attachments:
    #14666
    vhgmcbuddy
    Member

    Tignes all sandblasted and primed, then sprayed black.

    Attachments:
    #14676
    vhgmcbuddy
    Member

    Blue bits 🙂

    Attachments:
    #14691
    vhgmcbuddy
    Member

    Nearly reassembled

    Attachments:
    #14704
    vhgmcbuddy
    Member

    All back together just need to paint bolts blue. Totaly forgot

    Attachments:
Viewing 15 posts - 1 through 15 (of 39 total)
  • You must be logged in to reply to this topic.