Trusty self lift cultivator

Home Forums The Main Forum Area Projects Trusty self lift cultivator

This topic contains 1 reply, has 2 voices, and was last updated by  trusty220 1 month, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34462

    halfa
    Participant

    This has been my lockdown weekend project for the last couple of months. Rusted solid when I got it so fully stripped down, cleaned up with wire cup on grinder. Had to make a couple of parts for the trip mechanism. Then all red oxide primed and 3 coats of colour to finish. Not sure if the red parts are supposed to red but I just thought it would brighten it up a bit. Another implement saved anyway, a set of cambridge rolls are next in the queue.

    Attachments:
    #34465

    trusty220
    Keymaster

    A very nice job that you’ve made of it as well. I particularly like the early version of this for the cast iron wheels with the name cast into them.

    Nice to see that you have used the Planet Junior tines in triple hoe plates as well- it certainly makes for something out of the ordinary.

    Cambridge Rolls will be a doddle after getting the Self-Lift Cultivator to work! Keep up the good work.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.