MG5. Track outer frame removal.

Home Forums The Machinery Forums Ride-on machines MG5. Track outer frame removal.

This topic contains 49 replies, has 7 voices, and was last updated by  crawler 3 months, 1 week ago.

Viewing 5 posts - 46 through 50 (of 50 total)
  • Author
    Posts
  • #29001

    silverfoxfintry
    Participant

    Good afternoon Rob.

    Thank you for offering to take some pictures.
    If possible can you include some basic measurements?

    Regards

    Iain

    #29003

    crawler
    Participant

    Hi Iain
    No problem, glad to help. I’ll get you some dimensions when I’m taking the photos.
    Rob

    #29021

    crawler
    Participant

    Hi Iain
    Here are the photos of my MG5 showing the cover and toolbox. The dimensions are in the PDF file.
    The cover looks to made using 16 gauge steel sheet. I have not given dims for the toolbox lid, it is a clearance fit over the top of the toolbox. The lip round the side is approx 10mm.
    Hope this help.
    Rob

    #29042

    silverfoxfintry
    Participant

    Hello Rob.

    I can’t thank you enough for the pictures and drawing you sent.
    I now have enough information to fabricate the cover and the box.
    I will post pictures once it is completed.

    Best regards

    Iain

    #29046

    crawler
    Participant

    Hello Iain
    No problem, look forward to seeing photos of the finished cover and toolbox.
    Rob

Viewing 5 posts - 46 through 50 (of 50 total)

You must be logged in to reply to this topic.