MG Ransome Crawler Plough

Home Forums General Help and information MG Ransome Crawler Plough

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #32248
    vhgmcbuddy
    Member

    I have an MG5 & MG6 crawlers with single furrow ploughs [TS65 & TS66] but am missing the share & tips for both [SHP-M]. Can’t seem to find anyone that can supply these. Does anybody know someone who might have these?

    #32249
    dave
    Participant

    A friend of mine had the same problem. He managed to cut a bit of digger bucket
    lip plate to size and carefully trimmed the old worn share to shape and mig
    welded the lip plate into place. Not a 100% job but it got him ploughing again.
    Can you please send me the frame and engine numbers for the Ransomes register.

    #32250
    vhgmcbuddy
    Member

    Thanks for your interest Dave. I have no shears to copy so am wondering what metal I could use if I made one from scratch.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.